Setup
- Pax A920, A80 or A60
- WiFi
Steps
- Select the Settings app on the terminal's idle screen.
- Input the Settings password and then select the green check button and then “OK”. Contact Vend support if you do not know the settings password.
- Turn on the Wi-Fi option. Then select the Wi-Fi option. Only local Wi-Fi networks that have the SSID broadcast option enabled will be displayed. To view or edit the network settings select the desired WiFi network.
- After selecting the desired Wi-Fi network, input the Wi-Fi case sensitive password and select “Connect”. When the terminal has successfully connected to the Wi-Fi access point the Status will display “Connected”. Select the back icon to return to the Settings menu or to exit.
Manual Network Configuration
If the desired Wi-Fi network is not displayed it will be necessary to manually configure the network. In the upper right-hand corner select the three dots icon. Then select the “Add network” option.
The Add Network pop up screen will display. Enter the case sensitive Wi-Fi network SSID. Next, select the security type from the drop-down menu. Now enter the case sensitive Wi-Fi network password. Next select “Save” to save the settings.
On the Vend app home screen, it should now display 'Connected' if the connection was successful.
Additional Information