Setting up your Epson TM-m30II and TM-m30II-NT (USB)


What you need 

In order to set up your receipt printer with your desktop, you'll first need to make sure you have the following: 

Epson TM-m30II and TM-m30II-NT

Power cable Epson_Product_power_cord.jpeg
USB cable  Epson_USB_Wire.jpeg

Paper roll





Paper rolls

Make sure you have 80mm receipt rolls. To load your receipt roll, open the latch on the top right of the printer, place the roll inside and pull some of the paper through before closing the lid.

Cash drawer (optional)

You may also wish to set up your cash drawer at the same time, to do this you'll need a specialized cash drawer cable. This is similar looking to an ethernet cable but is smaller on one end.

Adding the Epson TM-m30II or TM-m30II-NT to your desktop

Windows Mac

Downloading and installing the Epson driver 

First, download the latest printer drivers. This is specialized software that helps the printer run correctly on your computer.

To download this, go to Epson's website and select Windows Printer Driver.


1. Click Download page on the latest file and scroll down to confirm the download. You should see the download start in the left-hand corner of the window.

2. When this download is completed, go to your Downloads folder, right-click on the file, and select Extract All...extract.png


Not sure where to find the download? Go to Explorer and select Downloads from the left-hand list. The download will also appear at the bottom of Google Chrome, click the arrow here and select show in folder.

3. After extracting the file, a new folder will open. Double-click on the install and follow the installation guide instructions.

Extracted.pngOnce installed, you will see a confirmation box. Close this and continue to the next step.

Installing your Epson Printer

You will be brought to the printer setup screen where you'll need to input the following information:epson-printer-windows.png

1. Model: Select Epson TM-m30II or TM-m30II-NT under model.

2. Name: Type in a name of your choice or leave it as default.

3. Port Type: Set this to USB.

4. Port: Leave as Auto setup.

5. Click Save settings

6. Click Test print when the option becomes available to confirm the connection between the computer and your printer. 

7. Once printed, click Next.

To confirm your printer was installed onto Windows, go to Control Panel > Devices and printer and you will see your TM-m30 listed.  


Did this answer your question?
Have more questions? Contact us so that we can help you out.