Help Center
  1. How can we help?
  2. Hardware Help
  3. Barcode Scanners

How to troubleshoot your Socket Mobile Scanner on PC

Nash Krishnamoorthy
  • Updated

    • Objective

    Resolve issues with your Barcode Scanner not pairing to you Windows PC 

    Setup

    • Vend for PC
    • Socket Mobile Scanner 7Ci/7Qi or S700/S740 

    Steps

    1. Press and hold on the two buttons on the scanner for 3-4 seconds until you hear three beeps
    2. You can print the Barcode below and scan it to reset the Barcode scanner to factory settings

     

    Image_2019-07-30_at_15.52.47.png

     

    Remove the scanner from your PC Bluetooth settings

    1. Select the Start button

    2. Next, open the Settings page by clicking the Windows icon and then the settings cog. Alternatively, you can search 'settings' in the bottom left search bar.

    3. In Settings, click Devices from the list of options.

    4. Select the peripheral

    5. Click the Remove device button

    6. Click the Yes button to confirm

    Additional Information

    Please follow the step-by-step guide below to set it up again.

    Setting up my Socket Mobile Scanner for PC

    Was this article helpful?

    Have more questions? Contact us so that we can help you out.

    This guide is for information purposes only. While every attempt is made to ensure that information is accurate and up-to-date, some information is subject to change. We encourage you to work with tax, legal and other professional advisers (as applicable) to determine your requirements. Vend will not be held liable for information in this document and reserves the right to alter the content at any time.