How to pair your Pax S300 & D210 with Vend


  • Vend for Mac or PC
  • Vend on iPad
  • Pax S300 & D210


Create the payment type in Vend

1. Click Setup in Vend

2. Click Payment types

3. Click the Add Payment Type button


4. Click Begin Setup

5. Enter a name for the payment type

6. Click Save Payment Type


Get the terminal ready to pair


You need to connect the D210 to your wifi network before pairing it. To do this, you will need to follow this guide here.


The S300 is a hard wired device, meaning an ethernet cable needs to connect from the S300, to your router. Once the terminal is connected, the Pax S300 screen will display POS Online.

Connect the terminal to Vend

1. Click the Vend Payment Gateway payment type that was just created

2. Click Pair a Terminal


3. Enter the Serial Number on the terminal and choose the register you want to pair the terminal to and select Pair Register


4. Once you select save, you will then see the terminal serial number and the register it is paired to



Additional Information

  • Each terminal can only be paired with one Vend Register at a time
  • Repeat the above process for each terminal you need to connect
  • Multiple payment terminals can be paired under a single payment type
  • How do I pair my Pax D210 to my Wifi network?
Did this answer your question?
Have more questions? Contact us so that we can help you out.