How to change the interface type settings on your Epson TM-T82II receipt printer


Latest update: - Mandy Sethi

Objective

Change the type of interface from USB to Ethernet on your receipt printer  

Setup

  • Epson TM-T82II with USB and Ethernet/LAN interface

Steps

  1. Turn off the printer at the switch
  2. Hold down the feed button and turn it back on whilst still holding down the feed button
  3. Hold down the feed button again for 3 seconds. The print out will have Option 3 Customise Value Settings
  4. Press the feed button 3 times (under one second) followed by a 4th press and hold down until it prints.
  5. Once it prints, release the feed button.
  6. Look for Interface Selection, usually it's on line 10 or 17 depending on your printer version
  7. If Interface Selection is on line 10, press the feed button 10 times followed by another press and hold down until a print begins
    If Interface Selection is on line 17, press the feed button 17 times followed by another press and hold down until a print begins
  8. Once the print starts on either options above, release the feed button
  9. The printout will show either Ethernet or Auto (Ethernet and USB) 
  10. Depending on which line either option above appears on, for example 2. Ethernet, press the feed button 2 times, followed by a 3rd press and hold down until it prints.
  11. Once it prints, release the feed button.
  12. Turn the printer off at the switch
  13. Turn the printer on at the switch

Additional Information

Setting up your Epson TM-T82II for iPad

Setting Up Your Epson TM-T82II for Mac

Setting Up Your Epson TM-T82II for a Windows PC