How to connect CardConnect iSMP4 terminal to Wi-Fi network


Latest update: - Shane Connaughton

Setup

  • Vend for Mac or PC
  • Vend on iPad
  • CardConnect Ingenico iSMP4 terminal 

Steps

  1. Enter the following key sequence to access device menu: F, 7, 6, 7
  2. Select Wifi Properties
  3. Select Scan for Networks
  4. Press Enter to select the network to which you would like to connect
  5. Enter the password for the Wi-Fi network using the keypad or the on-screen keyboard
  6. The device will automatically reboot so it can use the new profile 

Additional Information

To navigate the Bolt menu use the following keys:

  • F1/F4 — Left/Right
  • F2/F3 — Down/Up
  • Green — Select/Enter
  • Red — Cancel/Return

If the device does not reboot automatically, press and hold down the .,#* and Yellow keys to manually reboot the device.

Once the device is connected, the screen displays "Bolted" and the device is ready for use.

 

Powered by Zendesk