Setting Up Your Epson TM-T82II for a Windows PC

Latest update: - Admin

This guide provides step-by-step instructions on installing an Epson TM-T82II Receipt Printer for Windows Computers.

Device checklist

In order to set up your receipt printer with your Mac, Windows PC or iPad you'll first need to make sure you have all the peripherals needed.


You will need a power cable for the printer and an ethernet cable to plug the printer into your internet router. If you don't already have an ethernet cable ask your printer supplier to include one when you buy the printer or pick one up from your local electronics store.

Receipt Rolls

Make sure you've got some 80mm receipt rolls ready to go. To load your receipt roll open the latch on the top right of the printer, place the roll inside and pull some of the paper through before closing the lid.

Cash Drawer (Optional)

You may also wish to set up your cash drawer at the same time, to do this you'll need a specialised cash drawer cable. This is similar looking to an ethernet cable but is smaller on one end.

Adding the Epson TM-82II to your Windows PC

Important: These are the instructions for setting up your Epson TM-T82II on your Windows computer. Click the following links if you are using a Mac or iPad.

Downloading and Installing the Epson driver

1. First, you will need to download the latest printer drivers for your computer. This is specialised software that helps the printer run correctly on your computer. To get this head over to Epson's website here.

2. Find the TM-T82II Driver and click Download page..

3. This will take you to the next page where you will have to scroll down to confirm the download. You should see the download start in the left-hand corner of the window.

4. When this download is completed, head to your downloads folder.

5. Double click on the file and select Extract all.

Checkpoint: Not sure where to find the download? Go to explorer and select Downloads from the left-hand list. The download will also appear at the bottom of Google Chrome, click the arrow here and select Show in folder.

6. After extracting the file, the installation will begin. Follow the installation guide instructions. Once installed a printer register box will open.

Installing your Epson Printer

You will be brought to the printer setup screen where you'll need to input the following information:

1. Model: Select Epson TM-T82II under model.

2. Name: Type in the name of your choice or leave as default.

3. Port Type: Set this to Ethernet.

4. Port: Leave this as Auto setup.

5. IP Address: Press and hold the 'push' button on the back of the printer for about 4 seconds. The printer will print out the network settings, and you should see the IP address listed up the top. Input this IP address here.

6. Once you've filled out these fields, click Save settings. A test receipt will be printed confirming that the printer has been successfully set up.

Printing on Vend with Epson

Now that your EPSON is installed you can start using it to print your receipts in Vend.

To perform a test print, follow the steps below:

1. Head over to the History tab and click on a sale.

2. Click view receipt.

3. Pick the receipt template you’d like to use and click Print.

4. This will take you to the print preview screen. If the Epson is not your default printer, click Change and select the printer from the list.

Once that's been changed you should be able to print out a receipt.

Connecting the Cash Drawer

Once you've got the printer all set up, you can connect up the cash drawer.

The cash drawer connects to your receipt printer and is triggered to open when you finish a cash or cheque sale, and the printer prints the receipt.

Tip: You can manually open the cash drawer by clicking CTRL + E if you are using the old Vend Sell Screen or by performing a test sale if you are using Register for PC.

To setup the Cash Drawer:

1. Plug the RJ12 connector cable (the one that looks similar to a phone line) from the cash drawer into the receipt printer.

2. Next, head to your Devices and Printers window on your computer.

3. Right-click on your receipt printer, select Printing preferences -> Peripherals.

4. Once in here, use the drop-down menu to select Cash Drawer.

5. Next, select End of Document and click open on both Cash Drawer #1 and Cash Drawer #2

Tip: If you want your cash drawer to fire before the receipt prints you can select the Start of Document option instead.

6. Apply these settings and test it out by clicking CTRL + E on your keyboard when in the old Vend Sell Screen or by performing a test sale if you are using Register for PC.