Setting up your Socket Mobile Scanner for PC, Mac and iPad

This guide provides step-by-step instructions on how to pair your Mobile Socket Scanner for your PC, Mac and iPad

  Important

Socket Mobile are retiring both their 7Qi and 7Ci Mobile Scanners for iPad at the end of 2018However we will still offer support for the two older models. Two new models have been released in their place, the S700 and S740. For more information on Socket Mobile's new Mobile Scanners, click on the links above.

 

Windows PC Mac iPad

To set up your Socket Mobile scanner for PC follow the steps below:

  Important

Your PC will need to be Bluetooth compatible to pair with the Socket Mobile scanner.

1. Press and hold the small power button until the scanner beeps or displays an LED light.

 

2. Your Socket barcode scanner is now powered on. For use with the PC, you'll want to ensure the scanner is set to keyboard mode.

To enable keyboard mode, scan the below barcode. 

 

Screen_Shot_2018-10-30_at_1.59.11_PM.png

 

  Tip

Try scanning the following barcodes directly on the screen, if it does not work, print off this page and scan it from there. These barcodes will also be in the manual that came with your socket mobile scanner.

 

3. Next open the Settings page by clicking the Windows icon and then the settings cog. Alternatively, you can search 'settings' in the bottom left search bar.

 

4. In Settings, click Devices from the list of options.

windows-settings-devices.PNG

 

5. Click Add Bluetooth or other device at the top of the page.

add_bluetooth.PNG

6. Next, select Bluetooth in the Add a device screen.

select_bluetooth.PNG 

7. Your PC will search for nearby Bluetooth devices, once it finds your Socket scanner, just click it to pair. 

select_socket.PNG

8. Your PC will pair with the scanner. Just click Done in the pop up menu.

select_done.PNG

9. Your scanner is paired! You'll now be able to scan products in Vend.

Did this answer your question?
Have more questions? Contact us so that we can help you out.