Setting up your Dymo 450 Turbo Label Printer for Windows PC or Mac

Before Getting Started:

Before printing from your Dymo, make sure you have the correct Label sizes supported with Vend. While Dymo supports a range of different label sizes we recommend 11352, 30336 or 1738541 Dymo labels.

Windows PC Mac

Installing your Dymo Label Printer

Screen_Shot_2020-12-16_at_10.41.03_AM.png

The DYMO printer requires special printing drivers in order to print from your Windows PC. Once you've installed the drivers, labels can be printed directly from Vend.

Follow the steps below:

  1. Go to the Dymo 450 Turbo page on DYMO's website
  2. Click the Support button

     

    Screen_Shot_2020-12-16_at_10.41.10_AM.png

     

  3. Under Drivers & Downloads, click the Windows driver to download
  4. Open the download and follow the DYMO Setup Wizard to install the software
  5. Connect your DYMO label Printer directly to your computer via the USB cable provided
  6. Load your labels into your printer. For instructions on how to do this, please check your DYMO 450 Turbo instruction manual.

  Tip

Don't have your instruction manual? Download it from the Support tab on the Dymo 450 Turbo page

Setting the print preferences in Windows

  1. Open the Start menu and and navigate to the Control Panel
  2. Locate the Devices and Printers icon and open this
  3. Right click on the DYMO printer and select Printer Properties
  4. In the Printer Properties window, click Preferences at the bottom and then Advanced on the right.
  5. This will open a window that displays the below settings. Verify that the paper is set to the same type of label you loaded earlier under the Paper/Output header

Select the label printing format in Vend

  Important

Printing Jewellery labels from Vend is not currently supported.

The DYMO 450 Turbo is a continuous printing format printer. To get your labels to print correctly, Vend needs to know this format. To set this up, follow the steps below:

1. In Vend, navigate to Setup -> General

2. Click the Label Printer Format dropdown box

3. Select Continuous feed and click Save 

Screen_Shot_2020-12-16_at_11.00.10_AM.png

How to print labels

Test print

To ensure the setup has been done correctly, we recommend test printing a series of labels. Follow the steps below:

  1. To test print a label, navigate to Products -> Products to print a barcode for.
  2. Choose a product and click on the product name
  3. Click Print Label
  4. Input the quantity of barcodes you wish to test print
    • Print out a run of 5 or more barcodes to ensure that the alignment is correct
  5. Click Next
  6. Click Print
  7. In the Chrome Print Preview screen, click more settings and select the Paper Size dropdown
  8. Select your label size code (or nearest label size code) here and click Print

Setting up and printing labels

Use the following guides to steup and print your product barcodes:

How to print barcode labels in bulk

How to customize your labels using the Dymo software

Did this answer your question?
Have more questions? Contact us so that we can help you out.